Peugeot 205 CTi (1985) — Rear Seat Cover & Foam Replacement Guide
Vehicle & Part Overview
Vehicle: 1985 Peugeot 205 CTi (Cabriolet / Pininfarina convertible body)
Part required: Rear seat bench — cover and foam/cushion padding layer
The 205 CTi convertible has a unique rear seat design specific to the convertible bodyshell. It sits lower-profile than the standard hatchback bench to accommodate the folding roof mechanism and reduced cabin height.
⚠️ Fitment warning: A standard 205 hatchback rear seat will not fit correctly. Mounting points and dimensions differ. Always source CTi-specific seats and trim.
The job splits into two separate items:
- Seat foam/cushion padding — rear base cushion and/or backrest foam
- Seat cover/trim — the fabric or vinyl outer covering
Foam Replacement
Original 205 CTi rear seat foam as NOS is essentially unobtainable. The practical route is custom-cut replacement foam matched to your original dimensions.
Recommended foam grades:
- Seat base (cushion you sit on): High-density reconstituted foam, 45 kg/m³ minimum
- Backrest: Medium-density foam, 35 kg/m³
💡 Tip: If the original foam has compressed rather than crumbled, retain it and use it as a physical template for an exact replacement cut. Take it with you to the supplier or send precise dimensions.
UK foam suppliers offering cut-to-size service:
- Foam For Comfort — cut-to-size service, widely used by auto trimmers
- The Foam Shop — similar cut-to-size service
Seat Cover Options
Option 1 — Pattern Covers (Budget Route)
Generic 205 seat covers exist, but CTi-specific rear covers are rarely produced by pattern manufacturers. Hatchback covers will not fit the CTi rear bench correctly.
Option 2 — Retrim with Matching Fabric (Recommended)
If the seat frame and foam are sound, a retrim is often the most practical and cost-effective solution.
Trim fabric supplier:
- Woolies Trim — Peugeot 205 seat search — stocks general classic car trim materials; useful for sourcing compatible fabrics
1985 CTi original trim options included:
- Grey sport fabric
- Red/black sport fabric
- Full leather
Bring a photo of the original fabric pattern to any trimmer if colour and texture matching is important.
Option 3 — Sourcing a Good Used Cover
The CTi is well-supported in the classic French car breaker scene. A used cover in the correct colour may be the fastest route to an authentic result.
- Car and Classic Parts — search "Peugeot 205 CTi rear seat"
- Hemmings Parts Search — worth checking
- leboncoin.fr — French classifieds; strong 205 salvage scene, use Google Translate if needed
- Mister Auto and Oscaro — French parts platforms that occasionally carry NOS or quality reproduction Peugeot trim
- 205 GTI Owners Club (UK) — covers the CTi community; members often have parts or can advise on sourcing
Safety & Fitment Notes
- Seat covers and foam are not structural safety items, so pattern or reproduction materials are acceptable for this application
- Ensure any replacement foam matches the original profile — incorrect thickness on the base cushion can affect occupant seating position relative to the seatbelt geometry
- Confirm whether your car has the seat cushion base, backrest, or both requiring attention before ordering foam cuts, as these are separate components with different dimensions and density requirements