Front Left Wing — 1977 MG Midget (Mk4 / 1500 Rubber Bumper)
The 1977 MG Midget sits in the Mk4 / 1500 rubber bumper era (1974–1979). This variant is well supported for body panels.
Vehicle & Part Overview
Vehicle: 1977 MG Midget — Mk4 / 1500 (Triumph 1500 engine, rubber bumper specification)
Part required: Front Left Wing — driver's side (RHD) / passenger's side (LHD)
The rubber bumper cars use a different wing profile to the earlier chrome bumper Midgets. The body was raised to accommodate the bumper overriders and altered front end geometry, meaning chrome bumper and rubber bumper wings are not interchangeable.
OEM Part Number:
- AHH5954 — Front Wing, Left Hand (verify LH/RH listing with your supplier before ordering)
Panel Types
| Type | Best For | Notes |
|------|----------|-------|
| Heritage / OEM Reproduction | Concours / best fit | Highest panel quality |
| Quality Reproduction | Driver-quality restoration | Good fit — check metal gauge |
| Second Hand | Budget build | Inspect carefully for rust |
Sourcing Recommendations
Moss Motors — strong stock of Midget bodywork panels:
https://www.mossmotors.com/catalogsearch/result/?q=MG+Midget+1500+front+wing
Rimmer Bros — also stock Midget panels; search "Midget front wing left":
https://www.rimmerbros.com/
Hemmings — for Heritage-quality reproduction panels:
https://www.hemmings.com/parts?q=MG+Midget+1500+front+wing+left
Safety & Fitment Notes
⚠️ Before fitting a new wing, inspect the inner wing and A-post for rust. These cars are notorious for hidden corrosion behind the front wings. Fitting a new panel to a rotten shell will require the work to be redone.
- Confirm LH/RH designation with your supplier — listings vary between retailers
- If the existing wing is only partially damaged, a repair panel may be more practical than a full replacement
- Check metal gauge on reproduction panels — quality varies between manufacturers